In order to to do this, you must first be in Biotech Mode, then:

1. Place the thermometer in the wall holder (Model 692 Only)
2. Press and hold the Recall button, while removing the probe from the probe well. Once the probe is removed, release the Recall button.
3. Press and release the Recall button until Default Mode is displayed in the upper left corner of screen
4. To change between the Oral, Adult Axillary, and Pediatric Axillary modes, press and release the Mode Selection button. Observe that the display changes between ORAL, ADULT AXILLARY and PED AXILLARY when the Mode button is pressed.
5. Replace the probe into the probe well to save default setting, then exit the Biotech mode. This will return the unit to normal operation.

In order to to do this, you must first be in Biotech Mode, then:

1. Place the thermometer in the wall holder (Model 692 Only).
2. Press and hold the Recall button, while removing the probe from the probe well. Once the probe is removed, release the Recall button.
3. Press and release the Recall button to move sequentially through the various program categories until you see “Units Default” in the upper left hand corner of the screen.
4. Change default temperature mode to Celsius or Fahrenheit by pressing and releasing the C/F button.
5. Replace the probe into the probe well and the device will go into Biotech mode and return to normal operation.

Please refer to your SureTemp Plus 690 or SureTemp Plus 692 thermometer User Manual for an explanation of error codes.

For further assistance, please contact your local Hillrom Customer Support.